Impact factors of Blastocystis hominis infection in persons living with human immunodeficiency virus: a large-scale, multi-center observational study from China.

BACKGROUND: Blastocystis hominis (Bh) is zoonotic parasitic pathogen with a high prevalent globally, causing opportunistic infections and diarrhea disease. Human immunodeficiency virus (HIV) infection disrupts the immune system by depleting CD4+ T lymphocyte (CD4+ T) cell counts, thereby increasing Bh infection risk among persons living with HIV (PLWH). However, the precise association between Bh infection risk and HIV-related biological markers and treatment processes remains poorly understood. Hence, the purpose of the study was to explore the association between Bh infection risk and CD4+ T cell counts, HIV viral load (VL), and duration of interruption in antiviral therapy among PLWH. METHODS: A large-scale multi-center cross-sectional study was conducted in China from June 2020 to December 2022. The genetic presence of Bh in fecal samples was detected by real-time fluorescence quantitative polymerase chain reaction, the CD4+ T cell counts in venous blood was measured using flowcytometry, and the HIV VL in serum was quantified using fluorescence-based instruments. Restricted cubic spline (RCS) was applied to assess the non-linear association between Bh infection risk and CD4+ T cell counts, HIV VL, and duration of interruption in highly active antiretroviral therapy (HARRT). RESULTS: A total of 1245 PLWH were enrolled in the study, the average age of PLWH was 43 years [interquartile range (IQR): 33, 52], with 452 (36.3%) being female, 50.4% (n = 628) had no immunosuppression (CD4+ T cell counts > 500 cells/µl), and 78.1% (n = 972) achieved full virological suppression (HIV VL < 50 copies/ml). Approximately 10.5% (n = 131) of PLWH had interruption. The prevalence of Bh was found to be 4.9% [95% confidence interval (CI): 3.8-6.4%] among PLWH. Significant nonlinear associations were observed between the Bh infection risk and CD4+ T cell counts (Pfor nonlinearity < 0.001, L-shaped), HIV VL (Pfor nonlinearity < 0.001, inverted U-shaped), and duration of interruption in HARRT (Pfor nonlinearity < 0.001, inverted U-shaped). CONCLUSIONS: The study revealed that VL was a better predictor of Bh infection than CD4+ T cell counts. It is crucial to consider the simultaneous surveillance of HIV VL and CD4+ T cell counts in PLWH in the regions with high level of socioeconomic development. The integrated approach can offer more comprehensive and accurate understanding in the aspects of Bh infection and other opportunistic infections, the efficacy of therapeutic drugs, and the assessment of preventive and control strategies.

Evaluation of Head and Cervical Spine Posture after Therapy with Maxillary Protraction Appliances / Evaluación de la Postura de la Cabeza y la Columna Cervical Después de la Terapia con Aparatos de Protracción Maxilar

SUMMARY: The objective of this study was to evaluate the changes of head and cervical spine posture of skeletal class malocclusion in adolescent with maxillary protraction. Thirty cases of skeletal class malocclusion were randomly selected from the Stomatological Hospital of Shanxi Medical University. High-quality lateral cephalograms were collected including pre- and posttreatment to compare the changes of head and cervical spine posture. Data were processed using SPSS 26.0 statistical software. The paired-t test was used to compare pre- and posttreatment mean angular measurements.A significant difference in the SNA(p<0.001), SNB(p<0.01), and ANB(p<0.001) between T1 and T2 showed an improvement in the sagittal relationships. A significant change was observed in middle cervical spine posture, while upper cervical spine posture variables showed no significant difference after treatment. Skeletal class with maxillary protraction appliance not only led to the improvement of sagittal relationship, but also changed the middle cervical spine posture.

El objetivo de este estudio fue evaluar los cambios en la postura de la cabeza y la columna cervical debido a la maloclusión clase esquelética en adolescentes con protracción maxilar. Treinta casos de maloclusión de clase esquelética fueron seleccionados al azar del Hospital Estomatológico de la Universidad Médica de Shanxi. Se recogieron cefalogramas laterales de alta calidad, incluidos el tratamiento previo y posterior, para comparar los cambios en la postura de la cabeza y la columna cervical. Los datos se procesaron con el software estadístico SPSS 26.0. Se utilizó la prueba t pareada para comparar las medidas angulares medias antes y después del tratamiento. Una diferencia significativa en SNA (p <0,001), SNB (p <0,01) y ANB (p <0,001) entre T1 y T2 mostró una mejora en las relaciones sagitales. Se observó un cambio significativo en la postura de la columna cervical media, mientras que las variables de postura de la columna cervical superior no mostraron diferencias significativas después del tratamiento. La clase esquelética con aparato de protracción maxilar no solo condujo a la mejora de la relación sagital, sino que también cambió la postura de la columna cervical media.

Finite element analysis of tooth movement under different retraction force and intrusive force in double-archwire lingual orthodontics system.

The objectives of this study were to evaluate the tooth movement tendency during space closure in maxillary anterior teeth by various combinations of retraction force and intrusive force in a double-archwire lingual orthodontic system. Mini-implant-double slot lingual orthodontics system models of the bilateral maxillary first premolar extraction cases were constructed. Three-dimensional finite element models of the maxilla were constructed with definite position mini-implants (8 mm) and power arms (6 mm). Different retraction forces(50gf、100gf、150gf)were applied with the help of a nickel-titanium closed coil spring on the plate side. Intrusive forces(0gf、50gf、100gf)were applied with the help of the mini-implant between the two central incisors, and the initial displacements of the maxillary anterior teeth were analyzed. Variable amounts of displacements like controlled tipping, uncontrolled tipping, lingual crown tipping, labial root tipping, extrusion and distal crown tipping were observed in all the models, and these tendencies increased as the magnitude of retraction force increased, and these tendencies decreased as the magnitude of intrusive force increased. When the intrusive force was greater than or equal to the retraction force, the maxillary central incisors showed the trend of lingual crown tipping and labial root tipping, resulting in uncontrolled tipping movement. In terms of horizontal changes, the increasing width of bilateral anterior teeth was observed, with canines showing the least increasing trend. Various combinations of retraction force and intrusive force in a double-archwire lingual orthodontic system provide a new choice for torque control of the anterior teeth. Although anterior mini-implants and elastics can achieve incisor intrusion and lingual root torque, they cannot achieve the expected torque without additional torque control methods.

Correlation between the anatomical morphology of palatal rugae and sex / Correlación entre la morfología anatómica de las rugas palatinas y el sexo

SUMMARY: To investigate the correlation between the anatomical morphology of palatal rugae and sex. The study sample consisted of 120 students studying from Shanxi Medical University, of which 60 were females and 60 were males. The digital model of the palatal rugae was obtained by the 3 Shape TRIOS intraoral scanner. And the shapes of palatal rugae were recorded. Association between palatal rugae shape and sex were tested using Chi-square analysis. And logistic regression analysis (LRA) was carried out to calculate the accuracy of gender prediction using rugae shapes. There was a statistically significant difference between males and females in terms of the distribution of wavy and circular palate rugae. The use of logistic regression analysis obtained a sex predictive value of 65 % when all the rugae shapes were analyzed. Digital images of the palatal rugae morphology contribute to more accurate and convenient for data collection and transformation. It was found that rugae patterns can moderately identify the sex of the specific population when multivariate statistics such as LRA is applied. The palatal rugae morphology can be utilized as an assistant measure for sex identification.

RESUMEN: Investigar la correlación entre la morfología anatómica de las rugas palatinas y el sexo. En la muestra de este estudio se incluyeron 120 estudiantes de la Universidad Médica de Shanxi, (60 mujeres y 60 hombres). El modelo digital de las rugas palatinas se obtuvo mediante escáner intraoral 3 Shape TRIOS, y se registraron las formas de las rugas palatinas. La asociación entre la forma de las rugas palatinas y el sexo se evaluó mediante un análisis de Chi-cuadrado; para calcular la precisión de la predicción de sexo se llevó a cabo un análisis de regresión logística (ARL) Se observó una diferencia estadísticamente significativa entre hombres y mujeres en términos de la distribución de las rugas palatinas onduladas y circulares. El uso de análisis de regresión logística obtuvo un valor predictivo de sexo del 65 % cuando se analizaron todas las formas de las rugas. Las imágenes digitales de la morfología de las rugas palatinas contribuyen a una recopilación de datos más precisa. En este análisis se determinó que los patrones de rugas pueden identificar relativamente el sexo de una población específica, cuando se aplican estadísticas multivariadas como ARL. La morfología de las rugas palatinas se puede utilizar como medida de ayuda para la identificación de sexo.

Long non-coding RNA GAS6-AS1 enhances breast cancer cell aggressiveness by functioning as a competing endogenous RNA of microRNA-215-5p to enhance SOX9 expression.

Long non-coding (lnc) RNAs play crucial functions in human cancer. However, until recently, the involvement of the lncRNA GAS6-AS1 in breast cancer (BCa) malignancy has not been studied exhaustively. The roles and underlying mode of action of GAS6-AS1 action in BCa progression were examined through functional experiments. A decline in GAS6-AS1 level led to a significant decrease in BCa cell proliferation, and the ability for colony formation. Here, GAS6-AS1 competed as endogenous RNA by sequestering microRNA-215-5p (miR-215-5p) causing an enhanced expression of SRY-box transcription factor 9 (SOX9). The effects of silencing GAS6-AS1 on BCa malignant phenotypes could be ameliorated by inhibiting miR-215-5p or restoring SOX9. Thus, GAS6-AS1 acted as a lncRNA that drives tumor in BCa, and enabled progression of BCa through miR-215-5p /SOX9 axis regulation. These outcomes show that the GAS6-AS1/miR-215-5p/SOX9 axis is a potentially effective target for cancer treatment and management.

Morphology changes of maxillary molar distalization by clear aligner therapy / Cambios de la morfología en la distalización de molares maxilares mediante terapia con alineadores transparentes

SUMMARY: To evaluate the skeletal, dento-alveolar and soft tissue morphology changes after maxillary molar distalization by clear aligner therapy and identify the significant efficacy of molar distalization,18 patients in conformity with the inclusion criteria were selected. Pre- and post-treatment Cone Beam Computed Tomography (CBCT) were examined to measure the angular and linear parameters. All subjects were completed non-extraction clear aligner treatment by distalizing molars. A paired-t test and independent-samples t-test were performed to observe the difference between before and after treatment and the difference between the first molar and second molar respectively. P-values <0.05 were considered statistically significant. Predicted movement rate was calculated by the formula: (actual movement(mm)/planned movement(mm)) x100%. Most variables of pre- and post-treatment showed no statistical difference(P<0.05), excepting SNA angle (P<0.05) and Upper lip/E-line linear (P<0.01) due to incisor retraction. The first and second molar revealed a translation movement without significant tipping and vertical movement. Clear aligners provided a high predictability (83.44 %) of distalization the maxillary first molar, and 85.14 % of the maxillary second molar. Clear aligners can effectively achieve distal displacement of molars.

RESUMEN: Se seleccionaron 18 pacientes, de acuerdo con los criterios de inclusión, para evaluar los cambios en la morfología esquelética, dentoalveolar y de los tejidos blandos después de la distalización de los molares maxilares, mediante la terapia con alineadores transparentes e así identificar la significativa eficacia de la distalización de los molares. Se examinó a través de tomografía computarizada de haz cónico (CBCT) antes y después del tratamiento para medir los parámetros angulares y lineales. Todos los sujetos completaron el tratamiento con alineadores transparentes sin extracción mediante la distalización de los molares. Se realizó una prueba t pareada y una prueba t de muestras independientes para observar la diferencia entre antes y después del tratamiento y la diferencia entre el primer molar y el segundo molar, respectivamente. Los valores de p<0,05 se consideraron estadísticamente significativos. La tasa de movimiento prevista se calculó mediante la fórmula: (movimiento real (mm)/movimiento planificado (mm)) x 100 %. La mayoría de las variables de pre y postratamiento no mostraron diferencia estadística (P<0,05), excepto el ángulo SNA (P<0,05) y el labio superior/línea E lineal (P<0,01) debido a la retracción del incisivo. El primer y segundo molar revelaron un movimiento de traslación sin inclinación significativa y movimiento vertical. Los alineadores transparentes proporcionaron una alta previsibilidad (83,44 %) de la distalización del primer molar superior y del 85,14 % del segundo molar superior. Los alineadores transparentes pueden lograr efectivamente el desplazamiento distal de los molares.

Symptomatic and Asymptomatic Protist Infections in Hospital Inpatients in Southwestern China.

Cryptosporidium spp., Entamoeba histolytica, Giardia duodenalis, and Blastocystis sp. infections have been frequently reported as etiological agents for gastroenteritis, but also as common gut inhabitants in apparently healthy individuals. Between July 2016 and March 2017, stool samples (n = 507) were collected from randomly selected individuals (male/female ratio: 1.1, age range: 38-63 years) from two sentinel hospitals in Tengchong City Yunnan Province, China. Molecular (PCR and Sanger sequencing) methods were used to detect and genotype the investigated protist species. Carriage/infection rates were: Blastocystis sp. 9.5% (95% CI: 7.1-12.4%), G. duodenalis 2.2% (95% CI: 1.1-3.8%); and E. histolytica 2.0% (95% CI: 0.9-3.6%). Cryptosporidium spp. was not detected at all. Overall, 12.4% (95% CI: 9.7-15.6) of the participants harbored at least one enteric protist species. The most common coinfection was E. histolytica and Blastocystis sp. (1.0%; 95% CI: 0.3-2.2). Sequence analyses revealed that 90.9% (10/11) of the genotyped G. duodenalis isolates corresponded to the sub-assemblage AI. The remaining sequence (9.1%, 1/11) was identified as sub-assemblage BIV. Five different Blastocystis subtypes, including ST3 (43.7%, 21/48), ST1 (27.1%, 13/48), ST7 (18.8%, 9/48), ST4 (8.3%, 4/48), and ST2 (2.1%, 1/48) were identified. Statistical analyses confirmed that (i) the co-occurrence of protist infections was purely random, (ii) no associations were observed among the four protist species found, and (iii) neither their presence, individually or jointly, nor the patient's age was predictors for developing clinical symptoms associated with these infections. Overall, these protist mono- or coinfections are asymptomatic and do not follow any pattern.

Bioinformatic Prediction and Production of Four Recombinant Proteins from Different Developmental Stages of Trichinella spiralis and Testing of Their Diagnostic Sensitivity in Mice.

BACKGROUND: Trichinellosis is a serious food-borne parasitic zoonosis, thus finding high quality antigens is the key to serodiagnosis of trichinosis. This article reports the characterization and sensitivity of four recombinant proteins expressed by four genes (Wn10, Zh68, T668, and Wm5) from different developmental stages of Trichinella spiralis for the diagnosis of trichinellosis in mice. METHODS: This study was conducted in Jilin University and National Institute of Parasitic Diseases of Chinese Center for Disease Control and Prevention in 2017-2018. The structures and functions of the proteins encoded by four genes were predicted by bioinformatics analysis. The four genes were cloned and expressed, and the recombinant proteins were purified. Anti-Trichinella IgM and IgG antibodies in the sera of mice infected with T. spiralis from 1-45 d post-infection (dpi) were evaluated by ELISA. RESULTS: The optimal antigen epitopes of four proteins (P1, P2, P3, and P4) encoded by the four genes from T- and B-cells were predicted, and four purified recombinant proteins (r-P1, r-P2, r-P3, and r-P4) were successfully produced. For IgM, the antibody levels detected by the four recombinant antigens were approximately equal to the cut-off value. Anti-Trichinella IgG antibodies were first detected by r-P1 at 8 dpi, followed by r-P2, r-P3, and r-P4 at 10 dpi, 14 dpi, and 16 dpi, respectively, and the antibody levels remained high until 45 dpi. CONCLUSION: The recombinant antigens r-P1, r-P2, r-P3, and r-P4 could be antigens that react with antibodies, they showed high sensitivity in the detection of anti-Trichinella IgG antibodies in mice. Among these proteins, r-P1 may be a candidate antigen for the detection of anti-Trichinella IgG antibodies in the early infection phase and exhibited the best sensitivity among the antigens.

Bacterial community analysis on the different mucosal immune inductive sites of gastrointestinal tract in Bactrian camels.

The microbial communities colonize the mucosal immune inductive sites could be captured by hosts, which could initiate the mucosal immune responses. The aggregated lymphoid nodule area (ALNA) and the ileal Payer's patches (PPs) in Bactrian camels are both the mucosal immune inductive sites of the gastrointestinal tract. Here, the bacteria community associated with the ALNA and ileal PPs were analyzed using of 16S rDNA-Illumina Miseq sequencing. The mutual dominant bacterial phyla at the two sites were the Bacteroidetes, Firmicutes, Verrucomicrobia and Proteobacteria, and the mutual dominant genus in both sits was Prevotella. The abundances of the Fibrobacter, Campylobacter and RFP12 were all higher in ALNA than in ileal PPs. While, the abundances of the 5-7N15, Clostridium, and Escherichia were all higher in ileal PPs than in ALNA. The results suggested that the host's intestinal microenvironment is selective for the symbiotic bacteria colonizing the corresponding sites, on the contrary, the symbiotic bacteria could impact on the physiological functions of this local site. In ALNA and ileal PPs of Bactrian camel, the bacteria which colonized different immune inductive sites have the potential to stimulate different immune responses, which is the result of the mutual selection and adaptation between microbial communities and their host.

Morphological changes of frankel functional regulator III in mixed dentition with class III malocclusion / Cambios morfológicos del regulador funcional frankel III en dentición mixta con maloclusión clase III

The aim of this study was to evaluate the hard and soft tissue profile changes following treatment of functional and mild skeletal class III malocclusion in mixed dentition by means of the Frankel functional regulator (FR-3) appliance, and to reveal the mechanism and effectiveness of treatment with FR-3 appliance. Twenty-six patients (chronological mean age, 8.7±1.4 years; mean treatment duration, 10.3±1.3 months) with functional and mild skeletal class III malocclusion were selected and treated with FR-3 appliances. Lateral cephalogram was taken pre- and post-treatment, and the data was analyzed by paired-samples t test with SPSS22.0 software package. Differences were considered statistically significant at P < 0.05. The results demonstrated that the FR-3 appliance produced a statistically significant decrease in L1-NB, L1-MP, U1-L1 (P<0.01) and an increase greatly in ANB, MP-FH, Y axis, ANSMe, ANS-Me/N-Me and overjet (P<0.01). SNA, SNB were increased significantly (P<0.05). Meanwhile, N'-Sn-Pog', ULSn-SN, LLSiSN increased, S-N'-Si, LL-EP decreased with significant difference (P<0.01). S-N'-Sn, Cm-Sn-UL, UL-EP, Sn-Mes and Ns-Mes increased with significant difference (P<0.05). Therefore it was concluded that after FR-3 treatment, the position of mandible may rotate clockwise backwards and downwards, with the labioversion of upper incisors and linguoversion of lower incisors. Although point A moved mesially, the length and position of the maxilla did not change significantly. With the protrusion of upper lip and the retrusion of lower lip, the relationship among nose, upper lip, lower lip and chin become harmonious, the profile of soft tissue is more coordinated and attractive.

El objetivo de este estudio fue evaluar los cambios en el perfil de los tejidos duros y blandos después del tratamiento de la maloclusión funcional y leve de la clase III esquelética en la dentición mixta mediante el aparato regulador funcional Frankel (FR-3), y revelar el mecanismo y efectividad del tratamiento con el aparato FR-3. Veintiseis pacientes (edad media 8,7 ± 1,4 años; duración media del tratamiento, 10,3 ± 1,3 meses) con maloclusión funcional y leve de clase esquelética III fueron seleccionados y tratados con aparatos FR-3. El cefalograma lateral se tomó antes y después del tratamiento, y los datos se analizaron mediante la prueba t de muestras con el software SPSS22.0. Las diferencias se consideraron estadísticamente significativas a P <0,05. Los resultados demostraron que el dispositivo FR-3 produjo una disminución estadísticamente significativa en L1-NB, L1MP, U1-L1 (P <0,01) y un gran aumento en ANB, MP-FH, eje Y, ANS-Me, ANS -Me / N-Me y overjet (P <0,01). SNA, SNB se incrementaron significativamente (P <0,05). Mientras tanto, N'Sn-Pog', ULSn-SN, LLSi-SN aumentaron, S-N'-Si, LL-EP disminuyeron con una diferencia significativa (P <0,01). S-N'-Sn, Cm-Sn-UL, UL-EP, Sn-Mes y Ns-Mes aumentaron con una diferencia significativa (P <0,05). Por lo tanto, se concluyó que después del tratamiento con FR-3, la posición de la mandíbula puede girar en sentido reloj hacia atrás y hacia abajo, con labioversión de los incisivos superiores y linguoversión de los incisivos inferiores. Aunque el punto A se movió mesialmente, la longitud y la posición del maxilar no cambiaron significativamente. Con la protuberancia del labio superior y la retrusión del labio inferior, la relación entre la nariz, el labio superior, el labio inferior y el mentón se armoniza, el perfil del tejido blando es más coordinado y atractivo.

Ultrasound-guided percutaneous microwave ablation for 755 benign breast lesions: a prospective multicenter study.

OBJECTIVES: To evaluate the clinical efficacy of microwave ablation (MWA) of benign breast lesions (BBLs) and compare the learning curves of international radiologists (IRs) and surgeons. METHODS: In total, 440 patients with 755 clinicopathologically confirmed BBLs from 5 centers were prospectively enrolled from February 2014 to July 2018. Technical success, complications, volume reduction ratio (VRR), palpability, and cosmetic satisfaction after ablation were analyzed. In addition, the ablation time (AT) and energy (AE) with the number of procedures were analyzed for learning curve evaluation. RESULTS: The mean maximum diameter was 1.7 ± 0.6 cm. The complete ablation rate reached 100%, including 45.8% lesions adjacent to the skin, pectoralis, or areola. After a median follow-up of 13.7 months, the 12-month VRR of all lesions was 97.9%, and that for 1.0- to 2.0-cm and ≥ 2.0-cm lesions was 98.6% and 96.9%, respectively. A total of 55.9% of BBLs became nonpalpable (palpable in 85.7% of cases before MWA) by both the clinician and patient. The cosmetic and minimally invasive satisfaction rates were good or excellent in 98.4% and 94.5% of patients, respectively. The median AT/cm3 and AE/cm3 decreased as experience increased. The AE/cm3 of the IR with 5 years of experience was lower than that of the IR with 1 year of experience and the surgeons, while the AT/cm3 of surgeons was comparable with that of the IR with 5 years of experience at relatively mature phase. CONCLUSIONS: Ultrasound-guided percutaneous MWA is a valuable technique for the treatment of BBLs. TRIAL REGISTRATION: ClinicalTrials.gov (NCT02860104) KEY POINTS: • Ultrasound-guided percutaneous microwave ablation has the potential to become a valuable technique for the treatment of benign breast lesions. • A skilled interventional radiologist shows a rapid improvement in mastering the technique.

Effect of soft tissue thickness on the morphology of lip in orthodontic treatment / Efecto del grosor del tejido blando en la morfología del labio en el tratamiento de ortodoncia

The aim of this study was to evaluate the effect of soft tissue thickness of upper lip on lip retraction in orthodonticaltreated females and identify the ratio of maxillary incisor retraction to upper lip retraction. Pre- and post-treatment lateral cephalograms of 100 adults were examined to measure the lip thickness in upper lip and establish the classification standard. All subjects were treated with 4 first premolar extractions followed by upper central incisors retraction. Pre- and post-treatment lateral cephalograms of 19 patients were reviewed to determine the changes of the upper lip and incisor positions through landmarks displacement. An independent-samples t test and one-way analysis of variance were performed. The correlations between maxillary incisor retraction and upper lip retraction were explored by the Pearson correlation method. P-values<0.05 were considered statistically significant. The lip thickness of adult male patients was greater than that of adult female patients. The average ratio of maxillary incisor retraction to upper lip repositioning was 1.6:1,1.9:1 and 2.2:1 in the thin lips group, normal lips group and thick lips group, respectively. Gender differences exist in the thickness of upper lip. Horizontal changes of the maxillary incisor showed a significant correlation to horizontal changes of the upper lip (P<0.001).There were negative correlations between the thickness of upper lip and the ratio between change in maxillary incisor protrusion and change in upper lip protrusion.

El objetivo de este estudio fue evaluar el efecto del grosor de los tejidos blandos del labio superior, sobre la retracción del labio en mujeres tratadas con ortodoncia e identificar la proporción de retracción del diente incisivo maxilar con respecto a la retracción del labio superior. Se examinaron cefalogramas laterales, previos y posteriores al tratamiento de 100 adultos, para medir el grosor del labio superior y establecer un estándar de clasificación. Todos los sujetos fueron tratados con 4 extracciones de los primeros premolares seguidas de retracción de los incisivos centrales superiores. Se revisaron los cefalogramas laterales, previos y posteriores al tratamiento de 19 pacientes, para determinar los cambios del labio superior y las posiciones de los incisivos a través del desplazamiento de los puntos de referencia. Se realizó una prueba t de muestras independientes y un análisis de varianza de una vía. Las correlaciones entre la retracción del incisivo maxilar y la retracción del labio superior se exploraron mediante el método de correlación de Pearson. Los valores de p<0,05 fueron considerados estadísticamente significativos. El grosor de los labios de los pacientes adultos masculinos fue mayor que el de las pacientes adultas. La relación promedio de la retracción del incisivo maxilar al reposicionamiento del labio superior fue de 1,6:1,1; 9:1 y 2,2:1 en el grupo de labios delgados, grupo de labios normales y grupo de labios gruesos, respectivamente. Existen diferencias de sexo en el grosor del labio superior. Los cambios horizontales del incisivo maxilar mostraron una correlación significativa con los cambios horizontales del labio superior (P<0,001). Hubo correlaciones negativas entre el grosor del labio superior y la relación entre el cambio en la protuberancia del incisivo maxilar y el cambio en la protrusión del labio superior.

Clinical study on the posterior occlusal plane and morphology of temporomandibular joint / Estudio clínico sobre el plano oclusal posterior y la morfología de la articulación temporomandibular

The objective of the study was to investigate the morphological features of the temporomandibular joint in adult patients with posterior occlusal plane and different inclinations. Fifty five skeletal I occlusion patients with average were included, shooting CBCT in the intercuspal position, divided into 3 groups according to OPP-FH angle, and measurement of the temporomandibular joint morphology was calculated with cone beam computed tomography (CBCT) special software Invivo 5.0, Statistical analysis of three groups of data using SPSS23.0. The condyle usually locates in the middle of the fossa, the maximum axial area of the condyle (A) was statistically significant between the group 1 and the group 3. The internal and external diameter (MD) of the condyle was statistically significant between group 1 and group 3, and group 2 and group 3. The bilateral TMJ morphological features of the three groups were basically symmetrical. The position of the condyle in the fossa is mostly centered, and some of the posterior, the maximum axial area and the internal and external diameter of the condyle are different in three groups.

El objetivo de este estudio fue investigar las características morfológicas de la articulación temporomandibular (ATM) en pacientes adultos con plano oclusal posterior y diferentes inclinaciones. Se incluyeron 55 pacientes con oclusión esquelética tipo I, visualizados por tomografía computarizada de haz cónico (CBCT) en posición intercuspiana, y se dividieron en 3 grupos según el ángulo OPP-FH. La medición morfológica de la articulación temporomandibular se calculó con CBCT y mediante el software especial Invivo 5.0. El análisis estadístico de datos se realizó con el software SPSS 23.0. El cóndilo de la mandíbula generalmente se ubica en el centro de la fosa; el área axial máxima del cóndilo de la mandíbula (A) fue estadísticamente significativa entre los grupos 1 y 3. Los datos de los diámetros medial y lateral (DM) del cóndilo de la mandíbula fueron estadísticamente significativos entre los grupos 1 y 3 y los grupos 2 y 3. Las características morfológicas de la ATM de los tres grupos fueron básicamente simétricas. La posición del cóndilo de la mandíbula en la fosa fue principalmente centrada, y parte del área axial máxima, posterior y los diámetros medial y lateral del cóndilo de la mandíbula fueron diferentes en los tres grupos.

A Prospective Randomized Multicenter Controlled Trial on Salvianolate for Treatment of Unstable Angina Pectoris in A Chinese Elderly Population.

OBJECTIVE: To evaluate the efficacy and safety of salvianolate in elderly patients with unstable angina pectoris (UAP). METHODS: A prospective double-blind randomized placebo-controlled multicenter trial in elderly patients with UAP from 13 third-grade class-A hospitals in China was performed. A total of 318 patients were randomly allocated in a 1:1 ratio to an experimental group (160 patients) and a control group (158 patients). The experimental group was treated with salvianolate for 14 days on the basis of conventional medicine, and the control group was given a placebo for 14 days with the same criteria. Follow-up was lasted 28 days in both groups. The primary endpoint was biweekly frequency of angina pectoris attacks. The secondary endpoints included biweekly dosage of nitroglycerin, the Seattle Angina Questionnaire, angina pectoris severity and duration, myocardial injury markers, high-sensitivity C-reactive protein (hs-CRP) and N-terminal pro-B-type natriuretic peptide (NT-proBNP), as well as major adverse cardiovascular events (MACEs). Safety was assessed according to adverse events and serious adverse events. RESULTS: Baseline characteristics were similar between treatment groups. Compared with those in the control group, the frequency of biweekly angina attacks (2.92 vs . 4.08, P=0.025), the biweekly dosage of nitroglycerin, as well as the severity and duration of angina attacks (P<0.01) were reduced by salvianolate. The Seattle Angina Questionnaire score was also significantly improved in the experimental group than in the control group (P<0.05). No significant differences were observed between the two groups with respect to the incidence of MACEs. Salvianolate was well tolerated. CONCLUSIONS: Salvianolate appear to have efficacy and well tolerated for elderly patients with UAP. [ClinicalTrials.gov identifier: NCT03037047].

Kinetics Evaluation of IgM and IgG Levels in the Mice Infected with Trichinella spiralis Experimentally Using ES Antigens from Different Developmental Stages of the Parasite.

BACKGROUND: To assay the Trichinella-specific IgM and IgG antibody responses during the early stage of infection, serum was collected from mice infected with the muscle larvae (ML) of T. spiralis (ISS534) at different dpi (days post infection) up to 60 days. METHODS: The levels of IgM and IgG antibodies in serum were measured by ES antigens from different stage of T. spiralis using the ELISA method in Shanghai, China in 2017. RESULTS: The anti-Trichinella IgM and IgG could be detected by ES antigens from the adult three days worm (Ad3) as early as 5 dpi and 8 dpi, respectively. ES antigens from the mixture of adult six days worm & new born larvae (Ad6+NBL) was similar to Ad3. When antibodies were detected by these two antigens, the levels of IgM peaked at 14 dpi and then declined from 15 dpi to 60 dpi; the IgG peaked at 20 dpi, and gradually declined, however, higher detection levels were maintained until 60 dpi. CONCLUSION: Ad3 ES antigens showed more antigenicity than Ad6+NBL ES on titer detection of IgM and IgG antibodies, and the production of Ad3 ES is easier. In terms of early diagnosis, these two antigens are better than the ML ES antigens of T. spiralis, which antibodies could not be detected before 20dpi. Ad3 ES antigens might be good candidate for the early diagnosis of trichinellosis or the mixture of Ad3 and Ad6+NBL ES might be used.

Expression of Ihh signaling pathway in condylar cartilage after bite-raising in adult rats.

Temporomandibular joint osteoarthritis (TMJOA) is a complex inflammatory condition with multiple factors and degenerative processes co-occurring. However, its pathogenesis remains uncertain. The purpose of the study was to observe the expression of Indian hedgehog (Ihh) signal related molecules in TMJOA induced by bite-raising and to study the effect and mechanism of Ihh signaling. Our research indicated that Ihh signaling pathway can be activated in condylar cartilage induced by bite-raising. The histological analysis showed TMJOA-like structural changes of condylar cartilage in experiment groups. Ihh, Smoothened (Smo), and Gli zinc finger transcription factors-1 (Gli-1) were activated in the experimental groups, and the expression levels increased significantly over time, whereas the sham control groups showed no fluctuation. Additionally, the expression levels of matrix metalloproteinase-13 (MMP-13) and cysteinyl aspartate specific proteinase-3 (Caspase-3) in the experiment groups increased in a time-dependent manner compared with the matched sham control groups. In conclusion, our results indicated that the Ihh signaling pathway may activate the occurrence of TMJOA by mediating the hypertrophy of chondrocytes, which may be an important regulatory mechanism and potential therapeutic target in the repair of condylar cartilage.

Research on correction method of palatal rugae morphology in forensic digital identification system / Investigación sobre el método de corrección de la morfología de las rugas palatinas en sistema digital de identificación forense

SUMMARY: Palatal rugae is an irregular soft tissue, which is located in the front third of the hard palate, and is asymmetrically distributed from the middle suture to the sides. The difference, stability and extensive characteristics of palatal rugae morphology have gradually make it a characteristic indicator of forensic identification. However, a mature digital palatal rugae identification system has not yet been established at present. Feature extraction is the premise of palatal rugae image recognition. In order to obtain palatal rugae feature information in all directions and improve the reliability of forensic identification, it is necessary to collect palatal rugae images from a plurality of different angles. When the collected images are sent to the recognition system, the diversity of angles will often cause problems such as error recognition. If the tilted images are not rotated properly, it will make the forensic identification face many difficulties. To solve the problem of image skew caused by the diversity of acquisition angle, an algorithm based on orientation vector to correct the tilted palatal rugae images was proposed in this paper. Firstly, the criteria for standard palatal rugae image and the selection rules for feature points were set; Secondly, characterizing feature points according to the rules, and fitting two lines and find their direction vector; Finally, to obtain the corrected images, the tilted images were rotated by the angle determined by the two direction vectors. Simulation results show that the proposed algorithm can correct the tilted palatal rugae images collected from different angles and has strong robustness.

RESUMEN: Las rugas palatinas son tejidos blandos irregulares, que se ubican en el tercio frontal del paladar duro y se distribuyen asimétricamente desde la sutura mediana hacia los lados. La diferencia, la estabilidad y las características extensivas de la morfología de las rugas palatinas la han convertido gradualmente en un indicador característico de la identificación forense. Sin embargo, un sistema de identificación de rugas palatinas digitales maduras todavía no se ha establecido en la actualidad. La extracción de características es la premisa del reconocimiento de imágenes de las rugas palatinas. Para obtener información sobre las características de las rugas palatinas en todas las direcciones, y mejorar la confiabilidad de la identificación forense, es necesario recopilar imágenes de las rugas palatinas desde una pluralidad de ángulos diferentes. Cuando las imágenes recogidas se envían al sistema de reconocimiento, la diversidad de ángulos a menudo causará problemas como el reconocimiento de errores. Si las imágenes inclinadas no se giran correctamente, la identificación forense se enfrentará a muchas dificultades. Para resolver el problema del sesgo de la imagen causado por la diversidad del ángulo de adquisición, en este documento se propuso un algoritmo basado en el vector de orientación para corregir las imágenes de las arrugas palatinas inclinadas. En primer lugar, se establecieron los criterios para la imagen de las rugas palatinas estándar, y las reglas de selección para los puntos de características. En segundo lugar, se determinaron puntos de características según las reglas, y se ajustaron dos líneas y encontrar la dirección del vector. Finalmente, para obtener las imágenes corregidas, las imágenes inclinadas se giraron según el ángulo determinado por la dirección de dos vectores. Los resultados de la simulación muestran que el algoritmo propuesto puede corregir las imágenes de rugas palatinas inclinadas recopiladas desde diferentes ángulos y tiene una gran robustez.

Biomechanical analysis of micro-implants lingual straight wire appliance during retracting maxillary anterior teeth / Análisis biomecánico de microimplantes con dispositivo de alambre recto lingual durante la retracción de dientes maxilares anteriores

This study aimed to establish three-dimensional finite element models of micro-implants-lingual straight wire appliance and to investigate the effects of different wire patterns on the initial displacement of the maxillary anterior teeth and the stress of the periodontal ligament and tooth root during retracting maxillary anterior teeth in lingual orthodontics. A three-dimensional geometric models of maxilla with maxillary dentition was established using Cone-beam CT scan .Three types of maxilla models including microimplants and Duet-Slot Lingual Bracket appliance with three different arch wires ( model A: 0.016 inch × 0.022 inch stainless steel square wire; modelB: 0.016 inch stainless steel round wire; model C: double wire of 0.016 inch × 0.022 inch stainless steel square wire + anterior teeth 0.016 inch stainless steel round wire) were assembled by Unigraphics NX 8.5 software. The labial intrusion force and lingual retraction force were simulatively loaded to obtain initial displacement of the anterior teeth and the stresses of each tooth root and periodontal ligament, using three-dimensional finite element calculation software Ansys Workbench 15. The initial displacement of the lateral incisors was close to the bodily movement; and central incisors and lateral incisors slightly extruded. Compared with group A and group C, canine teeth appeared obviously horizontal "arched effect" by crown labial tipping in group B. The stress distribution of the tooth root and periodontal ligament was minimal and uniform in the group C. The 0.016 × 0.022- in stainless steel rectangular wire combined with 0.016- in stainless steel round wire used in the anterior teeth can better control the torque of the maxillary anterior teeth for space close in lingual orthodontics. Moreover, the stress distribution of tooth root and periodontal ligament is even, which is difficult to damage the periodontal ligament or result in external resorption of tooth root.

Este estudio tuvo como objetivo establecer modelos tridimensionales de elementos finitos de microimplantes linguales de alambre recto e investigar los efectos de diferentes patrones de alambre en el desplazamiento inicial de los dientes maxilares anteriores y el estrés del ligamento periodontal y la raíz del diente durante la retracción lingual sobre los dientes anteriores del hueso maxilar en ortodoncia. Se establecieron modelos geométricos tridimensionales del hueso maxilar con dentición utilizando una exploración por tomografía computarizada de haz cónico. Tres tipos de modelos maxilares, incluidos los microimplantes y el dispositivo Duet-Slot Lingual Bracket con tres arcos diferentes (modelo A: 0.016 pulgada × 0.022 pulgada alambre cuadrado de acero inoxidable; modelo B: alambre redondo de acero inoxidable de 0.016 pulgadas; alambre cuadrado de acero inoxidable de 0.016 pulgada × 0.022 pulgada y alambre redondo de acero inoxidable de 0.016 pulgada) ensamblados por el software Unigraphics NX 8.5. La fuerza de intrusión labial y la fuerza de retracción lingual se cargó simultáneamente, para obtener el desplazamiento inicial de los dientes anteriores y las tensiones de cada raíz dental y ligamento periodontal, usando el software tridimensional de cálculo de elementos finitos Ansys Workbench 15. El desplazamiento inicial de los incisivos laterales se relacionaba al movimiento corporal; mientra que los incisivos centrales e incisivos laterales se mostraron ligeramente extruidos. Comparado con el grupo A y el grupo C, los dientes caninos presentaron un "efecto arqueado" horizontal por la inclinación labial de la corona en el grupo B. La distribución del estrés de la raíz del diente y el ligamento periodontal fue mínima y uniforme en el grupo C. El alambre rectangular de acero inoxidable combinado con el alambre redondo de acero inoxidable de 0.016 usado en los dientes anteriores puede controlar mejor el torque de los dientes maxilares anteriores para cerrar el espacio en ortodoncia lingual. Además, la distribución del estrés de la raíz del diente y del ligamento periodontal es pareja, lo que dificulta dañar el ligamento periodontal o provocar una resorción externa de la raíz del diente.

Micro-implanted-anchorage safety: cortical bone thickness in the maxillary posterior region of skeletal class II malocclusion / Seguridad en el micro-implante de anclaje: espesor del hueso cortical en la región posterior del maxilar en maloclusión de clase esquelética tipo II

Cone Beam Computed Tomography (CBCT) measurement of cortical bone thickness and implantation angle in the maxillary posterior region was used to provide reference for the safety of Micro-Implanted-Anchorage (MIA) implantation in skeletal class II malocclusion. Twenty samples of CBCT images were collected from orthodontics patients (ages, 12-40 years) in Shanxi Medical University Stomatological Hospital, the thickness of cortical bone was measured at 45°, 60° and 90° from the alveolar crest, being at 4 mm, 6 mm and 8 mm, respectively. SPSS17.0 statistical software was used to analyze the data, and the one-way ANOVA and LSD method were compared. There was a significant difference in the thickness of the cortical bone obtained by implanting MIA at the same height of different angle (P≤0.05). The greater the inclination angle of the implanted MIA, the thicker the cortical bone. Also, the higher the implant site, the thicker the cortical bone thickness. Finally, the greater the thickness of the cortical bone in the maxillary posterior region of skeletal class II malocclusion, the greater the thickness of the cortical bone. At the same implantation height, implanted MIA with a tilt angle of 45º to 60º, 90º to obtain the best cortical bone thickness.

La medición del grosor del hueso cortical y del ángulo de implantación en la región posterior del maxilar por tomografía computarizada de haz cónico (TCHC) se utilizó para proporcionar una referencia para la implantación y el anclaje seguros de un Micro-Implante de Anclaje (MIA) en la maloclusión de clase esquelética tipo II. Veinte muestras de imágenes de TCHC fueron obtenidas de pacientes de ortodoncia (12-40 años) en el Hospital Estomatológico de la Universidad Médica de Shanxi. Se midió el grosor del hueso cortical a 45°, 60° y 90° de la cresta alveolar, encontrándose a 4 mm, 6 mm y 8 mm, respectivamente. Se utilizó el software estadístico SPSS 17.0 para analizar los datos, y se compararon con los métodos ANOVA y LSD de un factor. Hubo una diferencia significativa en el grosor del hueso cortical obtenido al implantar el MIA a la misma altura en diferentes ángulos (P <0,05). Cuanto mayor es el ángulo de inclinación del MIA implantado, más grueso es el hueso cortical. También, cuanto más alto es el sitio del implante, más grueso es el grosor del hueso cortical. Finalmente, cuanto mayor sea el grosor del hueso cortical en la región posterior del maxilar, en la maloclusión de clase esquelética tipo II, mayor será el grosor del hueso cortical.

Morphological changes of skeletal class III malocclusion in mixed dentition with protraction combined activities / Cambios morfológicos en maloclusión de la clase esquelética III en dentición mixta con actividades combinadas de protracción

The objective of the study was to investigate the morphological changes of skeletal class III malocclusion in mixed dentition with light force protraction combined activities. Randomly selected 30 cases of orthodontics in Shanxi Medical University orthodontics patients (ages: 6-10 years) of the lateral cephalograms. Using the oral maxillary casting type of pre-traction device, according to the condition of maxillary dentition to select the corresponding activities of the movable expansion appliance, each side of the force of about 150-200 g, requiring patients to wear 10-12 hours a day, the appliance should be removed after reaching normal occlusion. The correlation cephalometric profile of the cranial lateral radiographs before and after orthodontic treatment was measured. All patients with skeletal class III malocclusion were improved, concave type became direct type, measurements SNA, ANB, A-Ptm, MP-SN, ANS-Me/N-Me increased, maxillary advancement and reconstruction are more obvious; mandible rotates clockwise; the increase of lip inclination of anterior teeth compensatory changes, lower anterior tooth inclination changes smaller; upper lip forward, nasolabial angle decreased, improved appearance significantly. Light force protraction combined activities can make the mixed dentition of skeletal class III malocclusion in patients with significant improvement in profile appearance.

El objetivo de este estudio fue investigar los cambios morfológicos de la maloclusión clase esquelética III, en la dentición mixta, con actividades combinadas de protracción de la fuerza ligera. Se seleccionaron aleatoriamente 30 casos de ortodoncia en pacientes de ortodoncia de la Universidad Médica de Shanxi (edades: 6-10 años) a partir de cefalogramas laterales, utilizando el tipo de dispositivo de pretracción de vaciado maxilar oral, de acuerdo con la condición de la dentición maxilar para seleccionar las actividades correspondientes del dispositivo de expansión móvil, cada lado con fuerza de alrededor de 150-200 g, requiriendo que los pacientes los utilizaran de 10 a 12 horas al día. El dispositivo debía ser retirado después de alcanzar la oclusión normal. Se midió el perfil cefalométrico de correlación de las radiografías laterales craneales, antes y después del tratamiento ortodóncico. Se observó mejoramiento en todos los pacientes con maloclusión de clase esquelética. Las mediciones SNA, ANB, APtm, MP-SN, ANS-Me / N-Me aumentaron, el avance y la reconstrucción maxilar fueron los cambios más significativos; la mandíbula giró en el sentido de las agujas del reloj, se observó un aumento de la inclinación labial de los dientes anteriores. Fue reducida la inclinación anterior del diente inferior, el ángulo nasolabial disminuyó y en general mejoró significativamente la apariencia. Las actividades combinadas de protrusión de la fuerza radiante pueden llevar a una mejora signficativa en el perfil de pacientes con dentición mixta de maloclusión clase III.